Caratteristiche tecniche:
* MPEG-2 hardware decoding
* 2 x LED - status
* 1 x Smartcard-Reader
* 1 x Scart
* 1 x S-Video
* 10/100Mbit compatible Ethernet Interface
* USB-B
* S/PDIF Interface for digital bit stream out (AC-3)
* unlimited channel lists for TV/Radio
* channel-change time < 1 second
* full automatic service scan
* directly bouquet-lists
* EPG (electronic program guide)
* own videotext and subtitle
* multiple LNB-Switching control (DiSEqC)
* fully adaptable OSD in many languages
* Picture in Picture (PIP) and Picture in graphics (PIG)
* Zoom function
DreamBox DM100 technical data DBS-Tuner:
* Frequency Range 950 …. 2150 MHz
* Signal Level - 65 dBm …. - 25 dBm
* Signal-to-Noise Level 12 dB max.
* DBS-Tuner Input Connector F-Type female
* Input Impedance 75 Ohm
* AFC +/- 3 MHz
* Demodulation Shaped QPSK
* FEC Viterbi and Reed-Solomon
* Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8
* Roll-off Factor 35 %
* Demultiplexing according ISO 13818-1
Video decoder:
* Video Compression MPEG-2 and MPEG-1 compatible
* Video Standard PAL G/ 25 Hz
* Video Formats 4:3 / 16:9
* Letterbox for 4:3 TV-Device
Audio decoder:
* Audiokompression MPEG-1 & MPEG-2 Layer I and II
* Audio Mode Dual (main/sub), Stereo
* Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
* Output Level L/R 0,5 Vss on 600 Ohm
* THD > 60 dB (1 kHz)
* Crosstalk < -65 dB
Output digital:
* Output Level 0,5 Vss on 75 Ohm
* Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
* S/PDIF-Output optical (AC3)
Video parameter:
* Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
* Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
* Output: FBAS, RGB
USB:
* USB 1.22:
* Function: Update of Firmware
Ethernet:
* 10/100 MBit compatible interface
LNB Power and polarisation:
* LNB Current 500mA max. ; short-circuit-protected
* LNB Voltage vertical < 14V no load, > 11,5V at 400mA
* LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
* LNB shut-off at Standby-Mode
Count of active satellite position:
* DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
* DiSEqC - Rotor Control
Power consumption:
* < 10W / 12V
Input voltage:
* DC12V +/- 15%
Extern power supply:
* Input: 110-240V AC / 50-60Hz / 0,6A
* Output: 12V = / 1A or 2A
Physical specification:
* Ambient Temperature +15°C...+35°C
* Humidity < 80%
* Size (W x D x H): 195 mm x 130 mm x 30 mm
* Weight: 540 g